Canonical URL: https://density.io/resources/density-vs-milesight # Density vs. Milesight: which occupancy sensor should your office choose? Density Waffle combines anonymous room and desk sensing with published software pricing. Density Instant lets teams explore workplace questions through interactive charts. For a buyer deciding how rooms and desks should change, the evaluation can cover the sensor output, the reporting and the budget together. [Explore Waffle](https://density.io/waffle) and [see Instant](https://density.io/instant). Milesight offers several sensor families. Compare the proposed products, outputs and complete deployment; the words “AI” or “radar” alone do not describe what a model reports. ## Begin with the answer your space needs A phone booth may need a simple occupied-or-vacant status. A meeting room may need to distinguish solo use from group use. A desk requires a measurement boundary that excludes the neighboring seat. Set that requirement before comparing sensors. | Product | Published measurement | Buying implication | | --- | --- | --- | | [Density Waffle](https://density.io/waffle) | Zero, one, two or three-plus people | Supports availability and individual-versus-group use; three-plus is a category, not an exact larger headcount. | | [Milesight VS370](https://www.milesight.com/iot/product/lorawan-sensor/vs370) | Human presence using radar and PIR | Evaluate for room presence; do not equate presence with group-size measurement. | | [Milesight VS340 / VS341](https://www.milesight.com/products/docs/en/vs34x/steps/vs3xx/vs34x-product-introduction.html) | Desk or seat occupancy; PIR, with thermopile added in VS341 | Compare a desk installation against the actual seat boundary. | | [Milesight VS133 / VS135](https://www.milesight.com/iot/product/lorawan-sensor/vs133-vs135) | Regional people counting and bidirectional crossing counts using ToF | Specify whether the decision needs a count within a region or entrance/exit totals. | For a room program that needs to distinguish individual use from groups, Waffle's stated categories make Density a strong starting point. Validate placement in your actual rooms before expansion. ## Include the full-headcount requirement For meeting-room decisions that need a full headcount, begin with [Density’s workplace sensor guidance](https://support.density.io/hc/en-us/articles/37761559048987-Waffle-in-the-Workplace). It directs full headcount to Open Area, small-space categories to Waffle, and entrances and exits to Entry. Match the output and coverage plan to the question before comparing accuracy figures. For the Milesight option, keep the quoted [VS133/VS135 model](https://www.milesight.com/iot/product/lorawan-sensor/vs133-vs135), detection region and reporting output beside the proposal. Test both vendors against the same empty, solo and group conditions using agreed reference observations. ## Treat AI and privacy as product-specific questions Milesight's [occupancy comparison](https://www.milesight.com/iot/product/comparison-guide) distinguishes VS370 radar/PIR presence detection from VS121 AI/RGB workplace counting and VS321 AI/PIR/RGB occupancy sensing. Milesight offers several technologies; one model's capabilities do not describe its entire range. VS370 is image-free, and Milesight describes VS34x detection as anonymous. Both vendors therefore offer camera-free sensing. [VS370 details](https://www.milesight.com/iot/product/lorawan-sensor/vs370) and [VS34x details](https://www.milesight.com/iot/product/lorawan-sensor/vs34x) explain those approaches. The useful question is what the system reports: presence, a people count or an answer to a workplace question. Compare that output rather than the AI label. ## Compare the network and the operating work [Waffle](https://density.io/waffle) is self-installable, uses plug-in power without batteries, and connects through dual-band Wi-Fi with WPA2 PSK. Check power, mounting and network approval for each location. Milesight's VS370 and VS34x use batteries and LoRaWAN. [VS34x documentation](https://www.milesight.com/products/docs/en/vs34x/steps/vs3xx/vs34x-product-introduction.html) describes standard gateways and network servers, compatibility with Milesight platforms, and D2D control without gateways. Specify the route needed for historical analytics separately from direct device control. An existing LoRaWAN deployment may change the economics; available Wi-Fi and power may favor Waffle's approach. ## Price the complete result Density publishes Waffle hardware at **$279**, room/phone-booth software at **$8 per unit per month**, and desk software at **$2.50 per unit per month**, both software rates billed annually. [See current pricing](https://density.io/waffle). At unchanged rates, the room/booth three-year hardware-and-software subtotal is **$567 per unit: $279 + (36 × $8)**. It excludes installation, taxes, shipping, connectivity and other deployment costs. Confirm quantities and the applicable software category. Request a Milesight quote for the same spaces and output, including gateways, network service, analytics, integration and maintenance. Compare it with a Density quote for the same scope. A sensor-only price leaves those costs unanswered. ## Compare the workplace analysis Ask Density to show whether small groups dominate your meeting rooms or how desk use compares between sites. [Instant's public demonstration](https://density.io/instant) presents natural-language questions and interactive charts. Give the same questions to the supplier of the Milesight solution and review the answers in its selected platform. [Book a demo](https://demo.density.io) or email [sales@density.io](mailto:sales@density.io) to review Waffle's output, the software budget and an Instant chart for your desks and booths. For the Waffle budget calculation, read the [three-year cost guide](https://density.io/resources/waffle-three-year-cost). Use the [RFP acceptance schedule](https://density.io/resources/improve-your-occupancy-sensor-rfp-with-our-best-practice-guide) to compare complete proposals.